Adjusting The End Limits; Use - SOMFY Sonesse 40 PA Mode D'emploi

3.2 Adjusting the end limits

The limits can be set in any sequence.
Electric screwdriver prohibited: use a manual
adjustment tool: 4 mm or 5/32'' spherical-head
hex key.
Tool available in the catalogue; contact Somfy
for the part number.
1) Up limit
Press the control point UP button to raise the
shade to the Up limit and turn the corresponding
adjustment screw to set this limit.
2) Down limit
Press the control point DOWN button to lower the
shade to the Down limit and turn the corresponding
adjustment screw to set this limit.

4 Use

Up, Down & Stop
1) To move the shade from a limit to the other limit,
press briefly the UP or DOWN button.
2) To stop the shade, press the STOP button.
Copyright © 2011-2017 SOMFY ACTIVITES SA. All rights reserved
1
2
7