Field Of Application - SOMFY Sonesse 40 PA Mode D'emploi

Masquer les pouces Voir aussi pour Sonesse 40 PA:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TRANSLATED INSTRUCTIONS
These instructions apply to all Sonesse 40 drive, the different versions of which are available in
the current catalogue.

Field of application

Sonesse 40 drive are designed to drive all types of interior blinds except pantographs.
The installer, who must be a motorisation and home automation professional, must ensure that
the motorised product is installed in accordance with the standards in force in the country in
which it is installed such as EN 13120 relating to interior blinds.
Liability
Please read these instructions carefully before installing and using the drive. In addition to
following the instructions given in this guide, the instructions detailed in the attached Safety
instructions document must also be observed.
The drive must be installed by a motorisation and home automation professional, according to
instructions from Somfy and the regulations applicable in the country in which it is commissioned.
It is prohibited to use the drive outside the field of application described above. Such use, and
any failure to comply with the instructions given in this guide and in the attached Safety instruc-
tions document, absolves Somfy of any liability and invalidates the warranty.
The installer must inform its customers of the operating and maintenance conditions for the drive
and must provide them with the instructions for use and maintenance, and the attached Safety
instructions document, after installing the drive. Any After-Sales Service operation on the drive
must be performed by a motorisation and home automation professional.
If in doubt when installing the drive, or to obtain additional information, contact a Somfy adviser
or go to the website www.somfy.com.
SOMFY ACTIVITES SA, F-74300 CLUSES as manufacturer hereby declares that the drive
covered by these instructions when marked for input voltage 230V~50Hz and used as intended
according to these instructions, is in compliance with theessential requirements of the applica-
ble European Directives and in particular of the Machinery Directive 2006/42/EC and EMC
Directive 2014/30/EU.
The full text of the EU declaration of conformity is available at www.somfy.com/ce.
Antoine CREZE, Head of Regulations, Cluses, 10/2017.
2
Copyright © 2011-2017 SOMFY ACTIVITES SA. All rights reserved

Publicité

Table des Matières
loading

Table des Matières