10.3.2. functions of the keys
The configuration of the 2 keys on the board varies depending on the
operating status (AUTOMATIC / MANUAL).
ON
DIP
1 2 3 4
Fig. 16: Keys
22
Communications
interface
LED 1
LED 2
DIP switches
Key 2
Key 1
english
Type 8694
Start-up
MANUAL operating status (DIP switch 4 set to ON):
key
function
10)
1
Aerate (manually open / close the actuator)
2
Deaerate (manually open / close the actuator)
Tab. 8:
Configuration of the keys for MANUAL operating status
AUTOMATIC operating status (DIP switch 4 set to OFF):
key
function
1
Press for 5 s to start the X.TUNE function
2
-
Tab. 9:
Configuration of the keys for AUTOMATIC operating status
No function if the binary input was activated with the "Manual/Auto
10)
change-over" via the communications software.
depending on the operating principle of the actuator.
11)
11)
11)