Bartscher E 5230 Manuel D'instructions D'origine page 79

COOLING DOWN function (cooling the baking chamber)
•
The device is additionally equipped with a "
•
If it is necessary to cool the device down for lower-temperature cooking after it has
operated at a higher temperature, activate this function by pressing button
T 16
then . The LED display
•
To speed up the cooling down process, you can also open the device's door. This
will not deactivate the device, and the cooling-down process will continue
uninterrupted.
•
In manual mode this function is not automatically deactivated. When the desired
lower temperature is reached (the temperature is displayed on LED display
T 15
press button
factory-set temperature of 50 ° C .
•
In programme mode the device will automatically shut off when the baking
chamber cools by approx. 40 ° C. If the desired temp erature in the baking chamber is
still not reached, repeat the entire process.
•
The exhaust automatically opens when this function is activated.
Cooking / baking with larger numbers of cooking phases in manual mode
•
It is also possible in manual mode to execute a programme with a larger number of
cooking phases (max. 9 cooking phases).
•
To turn the device on, press button
Function buttons
functions. The LED display
•
Set individual parameters depending on the type of food product to be prepared:
•
After the desired programme is performed, press and hold for several seconds
T 12
button . The LED display
memory (e.g. if 3 programmes are already saved in positions 1, 2 and 3, the first
free place in memory will display as "PRG 04").
D 4
will read "COOLING DOWN".
to interrupt the process, or the device will cool down to the
T1
T 2 – T 3 - T 4
will flash and the device is ready for setting
D 4
will read "MANUAL".
cooking / baking mode,
temperature or cooking ∆T,
time or internal food temperature,
fan speed,
moisturising.
D 4
will show the number of the first free space in
COOLING DOWN
.
" function.
T 15,
D 1
)
- 75 -