Brandt TE214WS1 Guide D'utilisation page 31

99625732_ML_B.qxd 16/12/02 11:05 Page 31
Installing your hob in all simplicity
F
itting recommendations (cont'd)
- Place the hob in position in the cutout
on the worktop, pulling it forward as far
Fixing lugs F
RONT
as possible.
- Put the burners, caps and pan grates
in place.
- Connect the hob power supply cable
to the electrical installation of the kit-
chen. (See "Electrical connections" ).
- Connect to the gas (see "How to
connect the hob to mains gas" or
"How to connect the hob to butane
/ propane gas".
If you want, you can fix the hob in posi-
tion on its four corners, using the four
lugs and screws provided (See dia-
gram). Only use the holes provided. Fixing lugs B
ACK
Stop screwing when the lug starts
to bend.
Do not use a power screwdriver.
Worktop
Fixing lugs
31