Other Functions (Menu); Navigating In The Menu - Seca 787 Mode D'emploi Et Garantie

5.7 Other functions (menu)

Navigating in the menu

Activating/deactivating the
Autohold function (AHOLd)
The measurement procedure consists of the following steps:
• Record ID(s) using barcode scanner
• Record weight value and/or height value
• Transmit measuring results to
NOTE
• The height value must be displayed permanently (
order for it to be able to be transmitted to the
software by WiFi.
• The measurement procedure can be adapted on an individual basis.
The options which are active depend on the settings made in the
seca connect 103
► Follow the System instructions for use
► Contact your administrator or hospital technician.
Other functions and settings are available in the menu for the measuring
station.
A summary of the menu structure can be found in the section entitled
"Overview":
: ➔ "Menu structure (seca 787)" (page 14)
–
seca 787
: ➔ "Menu structure (seca 797)" (page 14)
–
seca 797
NOTE
only: Explanation of the functions under the
seca 797
➔ "Setting up the WiFi connection (seca 797)" (page 26).
1. Keep the key depressed until a menu item is displayed.
Menu
The last menu item selected is displayed.
2. Press the  or 
Hold
3. Confirm the selection by pressing the confirm key.
The current setting for the menu item (or a submenu item) is displayed.
4. To change the setting, press the 
setting is displayed.
NOTE
To increase or reduce a numerical value more quickly, you can press
and hold the 
Hold
5. Confirm the setting by pressing the confirm key.
You exit the menu automatically.
NOTE
• In order to switch to the menu above without changing a setting/to
exit the menu, briefly press the
• If no key is pressed for a few seconds, you exit the menu
automatically.
If the function is active, the weight value is automatically displayed
Autohold
permanently. It is then no longer necessary to press the 
NOTE
You can set which action automatically clears the displayed weight
value from the display (➔ "Setting permanent display of weight value
(HOLd)", page 34).
seca connect 103
software.
seca 103/452
key until the desired menu item is displayed.
BMI
or 
Hold BMI
or  key.
BMI
key.
Menu
English
software
key) in
Height
seca connect 103
.
menu item:
rF
key until the desired
key.
Hold
Operation • 33