Calculating And Displaying Body Mass Index (Bmi); Scanning Id(S) And Transmitting Data Via Wifi (Seca 797) - Seca 787 Mode D'emploi Et Garantie

.
170,5 cm

5.5 Calculating and displaying body mass index (BMI)

5.6 Scanning ID(s) and transmitting data via WiFi (seca 797)

32 •
6. Read off the measuring result.
NOTE
You can also read off the measuring result on the lower telescopic ele-
ment (read-off edge 2).
7. To exit permanent display of the measuring result, press the
The height value flashes in the display.
8. Ask the patient to step off the weighing platform.
9. Push the upper telescopic element into its lowest position.
10. Fold down the measuring flap.
Body mass index puts height and weight in a relationship to one another.
1. Determine the patient's weight value (➔ "Measuring weight", page 28).
2. Press the 
The weight value is displayed permanently in the display.
NOTE
When the
displayed permanently.
3. Determine the patient's height value (➔ "Measuring height", page 29).
The height value is displayed permanently in the display.
4. Press the 
BMI is calculated and displayed automatically.
5. To deactivate the
The display returns to height and weight value.
NOTE
The display automatically returns to height and weight value after
approx. 10 s.
The internal interface module of the device connects the measuring station to
seca
an EMR system wirelessly via the
software
A barcode scanner can be used to record the ID of the patient and/or the ID
of the user. The measuring results are transmitted to the electronic patient file
via a WiFi connection via the
The following conditions need to be met in order to use these functions:
• WiFi function of the device is active
• Device is connected to an EMR system via the
software
• Barcode scanner is connected to the device
key.
Hold
function is active, the weight value is automatically
Autohold
key.
BMI
function, press the 
BMI
seca connect 103
seca connect 103
key.
Height
key.
BMI
software.
software.
seca connect 103