Seca 787 Mode D'emploi Et Garantie page 12

Item Control
4
5
6
7
8
9
Workflow LED
12 •
key
Tare
• During the measurement procedure:
- Activate/deactivate
Tare
• In the menu:
- No function
key
Menu
• During the measurement procedure:
- Call up menu (press and hold key)
• In the menu:
- Go back one menu level/exit menu (press key briefly)
key

Hold
• During the measurement procedure:
- Activate/deactivate
Hold
• In the menu:
- Select menu item, submenu or setting
- Increase value (press and hold key to increase the value more quickly)
key

BMI
• If measured values are present:
- Activate function
BMI
• In BMI mode:
- Deactivate function
BMI
• In the menu:
- Select menu item, submenu or setting
- Decrease value (press and hold key to decrease the value more quickly)
Confirm key
• If measured values are present:
- Transmit measuring results to an EMR system via
(condition: Active interface module)
• In the menu:
- Confirm selected menu item
- Save set value
Shows the status of data recording and transmission (condition: Active interface module):
• Illuminated in green: Measurement procedure is active
• Flashing green (approx. 5 seconds): Measuring results being sent to the EMR system
(depending on setting)
• Illuminated in green (approx. 5 seconds): Measuring results successfully sent to the
EMR system (depending on setting)
• Illuminated in red (approx. 5 seconds): Error in data transmission or measurement
procedure
NOTE
• The data recorded and transmitted are set in the
have any queries, contact your administrator or hospital technician.
• The external interface module is available as an optional accessory for the
seca 452
measuring station (➔ "Optional accessories and spare parts (seca 787)",
seca 787
page 41).
Function
function
function
software
seca connect 103
software. If you
seca connect 103