I.5.2 Ped Category Of Pressurised Components; I.5.3 Information About Residual Risks That Cannot Be Eliminated; I.6 Description Of Controls; I.6.1 Master Switch - Hitecsa EWNLM 115 Manuel D'utilisation

I.5.2 PED CATEGORY OF PRESSURISED
COMPONENTS
List of PED critical components (97/23/CE Directive):
Component
Compressor
Safety valve
High pressure switch
Low pressure switch
Evaporator/condenser
I.5.3 INFORMATION ABOUT RESIDUAL RISKS
THAT CANNOT BE ELIMINATED
IMPORTANT!
Pay the utmost attention to the signs and symbols
located on the appliance.
If any risks remain in spite of the provisions adopted, or if there are any
potential or hidden risks, these are indicated by adhesive labels
attached to the machine in compliance with standard "ISO 3864".
2
Indicates the presence of live components.
Indicates the presence of hot surfaces
(refrigeration circuit, compressor heads).
I.6 DESCRIPTION OF CONTROLS
The controls consist of the master switch, the automatic switches and
the user interface panel located on the appliance.
I.6.1 MASTER SWITCH
Manually controlled type "b" mains power supply disconnecting switch
(ref. EN 60204-1§5.3.2).
I.6.2 AUTOMATIC SWITCHES
Automatic switch for compressor protection
This switch allows the supply or isolation of the compressor's main
power circuit.
PED category
I-II (125)
IV (122÷240)
IV
-
I
1
30
SECTION I: USER