to the end of the zipper (Fig. 26). ensure that the Inflatable cell
does not get caught by the zipper when closing.
7) Fasten the Velcro™ tab (H) to keep zipper closed.
8) zIP 1 - Reset the 2-step zipper by pulling the slider (I) to the
Velcro™ tab (H). zIP 2 - Close by pulling slider (I) in the opposite
direction to the end of the zipper (Fig. 29). ensure that the
Inflatable cell does not get caught by the zipper when closing.
Figure 27
Figure 29
Figure 31
J
15
Figure 28
H
Figure 30
H
I
9)
use a finger to push the
zipper ends into the openings
at the bottom of the the
packed Inflatable PFD (Fig.
30).
10) ensure the pull-tab (J) is on
the outside of the folded
Inflatable PFD. Fig. 31 depicts
a correctly folded Inflatable
PFD.
H
I