Skandika ERGOMETER WIRY Instructions De Montage page 29

Step 4
Remove the 6 screws (52), 4 washers (29), 2 curved washers (72) and 6 spring washers (35) from the main
frame (42).
Connect the middle sensor wire (64) to the lower sensor wire (55).
Slide the front cover (53) onto the front post (54) and fix the front post (54) on main frame (42) using the 6
screws (52), 4 washers (29), 2 curved washers (72) and 6 spring washers (35) as shown in the drawing.
29