Skandika ERGOMETER WIRY Instructions De Montage page 28

Step 2
Attach the right pedal (1R) onto the right crank arm and tighten it by turning it clockwise. Afterwards fix
the left pedal (1L) accordingly (to be screwed in anti-clockwise direction). The pedals are marked with "R"
(right) and "L" (left). Fix the pedal strap on the pedals (1R & 1L) and adjust the strap according to your feet/
shoe size.
Step 3
Fix the seat (49) on sliding bracket (48) with the three nuts (27) and washers (29) from back of seat (49).
Now fix the sliding bracket (48) on the seat post (45) with the knob (46) and the flat washer (29). Insert seat
post (45) into main frame (42), secure with quick release knob (43) at a proper height. The seat height may
be adjusted according to your individual needs later on.
28