Boston Scientific SC-6412 SCS Charger 2.0 System Kit Mode D'emploi page 19

Preparing for Charging
1. To set the length of the Charger Belt, place the Charger Belt around your body and insert each
strap through the Belt Loop. Affix the straps using the fasteners. Each strap is adjustable and
can be set to different lengths in order to optimize the location of the pouch and/or Belt loop.
See Figures 5 and 6.
2. After the Charger Belt length is set, remove the Charger belt until the next use.
Figure 6. Adjustable strap placed through Belt Loop and affixed using fasteners, similar to Velcro brand hook-and-loop fasteners.
Note: Charger Belt Extension is available if the Charger Belt is too small. If using the extension,
insert one strap through the loop on the extension and fasten the strap onto the belt. See
Figure 6. This will extend the length of the Charger Belt.
There are two lengths of the Charger Belt available (Small and Medium). If you need to
order a Charger Belt Extension, a different size Charger Belt or a replacement Belt Loop,
please contact Boston Scientific.
The Charger Belt The Charger Belt
Charger Handbook
90970865-13 REV A 15 of 75