Boston Scientific SC-6412 SCS Charger 2.0 System Kit Mode D'emploi page 17

9. When the Charger emits a distinct double beep, the Stimulator is charged. Remove the Charger
Belt or adhesive patch, turn the Charger off by pressing the power button and return the Charger
to the Base Station.
Do not confuse the end of charge signal (a distinct double beep) with the steady, continuous
misalignment signal.
Note: The end of a charge signal is a distinct double beep, and the alignment indicator is a steady
continuous signal.
Refer to the appropriate document below for additional information about your stimulator's
battery:
Spinal Cord Stimulation (SCS) System
Precision SCS System
Precision SCS System with MultiWave
Technology
Precision Spectra SCS System
Reference Document for instructions
Patient System Handbook for Precision
Spinal Cord Stimulator System
Patient System Handbook for Precision
Spinal Cord Stimulator System with
MultiWave Technology
Precision Spectra Information for
Patients
Charging the Stimulator
Document Section Title
"Charging your Stimulator"
"Charging your Stimulator"
"IPG Battery Life"
Charger Handbook
90970865-13 REV A 13 of 75