Important; Machine Operation; Pre-Cleaning Advice; Lowering The Brush-Deck - Numatic Nacecare TTB 3226 Mode D'emploi

Note: always ensure that the waste-water tank is empty before lifting.
!

Important

Do not operate machine unless the Operator Manual has been read and fully understood.
The machine is now ready to be driven to the cleaning site (see section 3 of quick set-up guide if necessary).
Before performing the cleaning operation, place out appropriate warning signs and sweep or dust-mop the floor.
Fig.20
After preparing the floor (see previous section), we are now ready to set the controls to suit the cleaning conditions.
Before any settings can be applied, ensure the brush deck is lowered.
While depressing left-hand foot pedal (see Fig.20), press down the release lever (see Fig.21) and gently release
the foot pedal to lower the brush deck (see Fig.22).
Fig.21
12

Machine Operation

Lowering the brush deck
!
Fig.22