Temp Setup (Optional) - Gima 35132 Manuel De L'utilisateur

In NIBP setup screen, short pressing "
confirm the setting and exit from setup screen. Short pressing display view "
Press up/down key to select patient type.

4.9.4 TEMP Setup (Optional)

Screen description:
² "Alarm high": high alarm limit setting for temperature. Setting range: 0.1~60.0℃, step is 0.1. The factory
default is "39℃".
² "Alarm low": low alarm limit setting for temperature. Setting range: 0~59.9℃, step is 0.1. The factory
default is "35℃".
² "Probe": to change or set the temperature probe type, "KRK" and "YSI" for optional.
² "Unit": to change or set the temperature unit, "℃" and "℉" for optional.
User Manual for Vital Signs Monitor
" key to select measuring mode. Press NIBP measuring "
Figure 4.15 NIBP setup screen
Figure 4.16 TEMP setup screen
41
" key to
" key to exit.