Setup And Operating Procedures; Battery Loading - Gima 28365 Manuel De L'utilisateur

SeTUP And OPeRATInG PROcedUReS

1. battery loading

a. Open battery cover at the back of the machine.
Load four "AA" size batteries. Please pay attention to polarity. The polarity
of the batteries should match the "+" or "-" signs inscribed in the battery
z
housing
b. Close the battery cover.
Take out the dry batteries if the apparatus is not used for along time
z
lest that liquid should flow out.
Σ
IVD
1
Please do not mix use new and old dry batteries or different type of dry
z
batteries.
PHTHALATES
Σ
IVD
1
The batteries offered along with the apparatus are of the trial product
used to identify the functions of the EMS. Their lifetime is probably
z
PHTHALATES
no longer than 2 months.
Σ
IVD
1
Please do not throw dry battery into fire.
z
PHTHALATES
Σ
IVD
The machine, the batteries and the electrode pads, must be disposed 1
z
of according to local regulations at the end of their usage.
Σ
IVD
1
PHTHALATES
Avoid the battery fluid to get in your eyes. If it should get in your eyes,
PHTHALATES
immediately rinse with plenty of clean water and contact a physician.
Σ
IVD
1
c. If you use the AC adapter, please make sure the monitor turn off or no
batteries. Put the connector plug of the adapter into the socket,
PHTHALATES
Then plug the adapter to AC outlet. When disconnect the AC Adapter:
Remove the AC Adapter from the electrical outlet;
z
Remove the AC Adapter plug from the monitor socket.
Do not plug or unplug the power cord into the electrical outlet with wet
z
hands.
Σ
IVD
1
Do not overload power outlets. Plug the device into the appropriate
z
oltage outlet.
PHTHALATES
Σ
IVD
1
z
If the AC adapter is abnormal, please change the adapter.
z
Σ
PHTHALATES IVD
1
Do not pull out the adapter when you are using the monitor!
Σ
IVD
Do not use any other type of AC adapter as it may harm the monitor!
1
PHTHALATES
Σ
IVD
1
PHTHALATES
PHTHALATES
ENGLISH
30