Setup Menu Screen - Gima 35132 Manuel De L'utilisateur

can press up "
SpO /HR value and the time value at the point where the cursor stays. Move cursor back and forth this way,
2
you can view the SpO
When pressing "
Ø
initial step is 1 point, after pressing "
becomes 5 points, and with 5 more pressing the step becomes 10, then 20. No matter what step is, as long
as you press "
direction.
Long pressing "
Ø
trend data according to prompt.
Short pressing print"
Ø

4.9 Setup Menu Screen

Long pressing Display View "
Note: your monitor may not cover all the functional parameter settings listed in the main menu screen. Please
refer to the monitor you purchased.
There are functional groups for setting parameters: "ECG, SpO
and System setup" on the Setup Menu Screen. NOTE: your monitor may not cover all above functions, such as
ECG, TEMP etc. please refer to the monitor in your hand.
User Manual for Vital Signs Monitor
" key or down "
/HR trend (12/24/96 hours long). Press "
2
" key or " " key to move cursor, the moving step is variable. The rule is that the
" or "
" or " " key towards the other direction, the step becomes 1 and towards the other
"key to enter the screen of clearing all graphic trend records, the user can delete all
" key to print this trend graph.
" key to enter into the Setup Menu screen, as shown in Figure 4.10.
Figure 4.10 Root setup menu screen (refer to your monitor)
" key to move the vertical cursor, the list box below will display
" key towards the same direction for 5 times, the step
, NIBP, TEMP, Patient Info, Nurse Call, Network
2
34
" key again to exit trend viewing.