System Setup; Sound Setting; Brightness Setting; Time/Date Setting - Gima Cardio-C Pocket ECG 33245 Notice D'utilisation

Chapter 8

systEm sEtuP

On the default menu screen, select "Setting" with Navigation Key, then press
""ok key button to enter into system setup screen, as shown in Figure 8.1.
1. Press the navigation key "/,  or : Move the cursor
upwards/backwards.
2. Press "" ok key Conform to option and enter into the corresponding
parameter setting.
3. Press the navigation key "/,  or : Adjust parameter values.
4. Press "" ok key: Conform to option, if you do not want to adjust
parameter values, or the setting is accomplished please enter the
" Back" button.

8.1 sound setting

On system setting screen, select "Volume" to enter into the sound setting
screen, as shown in figure 8.2.
• beep: Setting the beeper and voice Open/Close. Move the slide icon to left
means the beeper is disabled; Move the slide icon to right means the beep
is enabled.
• speech: Adjust the volume with the navigation key. Move the slide icon
to left means the speech volume is minimal; Move the slide icon to right
means the speech volume is maximal.

8.2 brightness setting

Brightness setting screen is shown in figure 8.3. Adjust brightness
with Navigation Key.

8.3 time/date setting

Date and time setting screen is shown as figure 8.4.
1. press navigation key "/,  or "and "" ok key to select the date
and time you need.
2. press navigation key ", "to adjust the time value.
3. Press "" ok key confirm the date and time setting value. If you do not
want to adjust the parameter value or the setting is finished, please press
the "" back button.
ENGLISH
58