Maintenance Menu; Transport And Storage; Technical Specifications - Tunturi C85 Mode D'emploi

contact your Tunturi dealer immediately. Always give
the model and serial number of your equipment. Please
state also the nature of the problem, conditions of use
and purchase date.
If you require spare parts, always give the model, serial
number of your equipment and the spare part number
for the part you need. The spare part list is at the back
of this manual. Use only spare parts mentioned in the
spare part list.

MAINTENANCE MENU

The meter features a Maintenance menu, which can
be accessed in the Start menu by pressing
seconds. You can navigate the Maintenance menu with
the arrow keys and confirm your selections by pressing
.
ENTER
A )
Start menu = exit the maintenance menu and return
to the Start menu.
B ) Total training values = total training time and
distance on the equipment. Use Reset to reset both
values.
C ) Software update = the display shows the meter's
software version. You can use the Update function to
upgrade the software version.
D ) Audio signals = set the meter's audio signals on or
off.
E ) Display = adjust display contrast

TRANSPORT AND STORAGE

Please follow these instructions when carrying and
moving the equipment about, because lifting it
incorrectly may strain your back or risk other accidents:
Always switch the power off and unplug the power cord
before you start moving the equipment around!
For transportation or moving of the device, two grown-
ups are needed. Remain standing in front of the device
on each side and take a sturdy grip at the handles. Lift
the front of the device so as to lift the rear of the device
on the wheels. Move the device and carefully put it
down to its new place.
NOTE! Transport the equipment with caution
over uneven surfaces, for example over a step. The
equipment should never be transported upstairs using
the wheels over the steps, instead it must be carried.
We recommend that you use a protective base when
transporting the equipment.
To prevent the equipment malfunctioning, store in a dry
place with as little temperature variation as possible and
protected from dust.

TECHNICAL SPECIFICATIONS

Length..........................................197 cm
Width ..........................................66 cm
Height..........................................169 cm
Weight .........................................105 kg
12
The Tunturi C85 meets the requirements of the EU's
EMC Directives on electromagnetic compatibility (89/
336/EEC) and electrical equipment designed for use
within certain voltage limits (73/23/EEC). This product
therefore carries the CE label.
The Tunturi model C85 meets EN precision and safety
standards (Class A, EN-957, parts 1 and 9) for fitness
devices. The precision of the capacity measurement is
secured during manufacturing by adjusting the brake
with a dynamometer. Calculation of exercise capacity is
based on rotation speed and moment.
Due to our continuous policy of product development,
for 3
ZOOM
Tunturi reserves the right to change specifications
without notice.
NOTE! The instructions must be followed carefully in
the assembly, use and maintenance of your equipment.
The warranty does not cover damage due to negligence
of the assembly, adjustment and maintenance
instructions described herein. Changes or modifications
not expressly approved by Tunturi Oy Ltd will void the
user's authority to operate the equipment!
WE WISH YOU MANY ENJOYABLE TRAININGS WITH
YOUR NEW TUNTURI TRAINING PARTNER!