Tunturi C85 Mode D'emploi page 5

3 . Thread the adjustment key cord through the round
console support tube in the front tube so that the cord
comes out from the upper end of the console support
tube.
CAUTION!
Do not let the cords fall into the front frame
tube!
4 . Push the handle onto the shaft simultaneously
pulling upwards the adjustment key cord from the
console support tube.
5 . Lock the handle by fastening the base plate (
the allen screw ( H ) at the end of the shaft.
PEDAL CRANKS
1. Push the right pedal crank forward to push the
fastening tube at the front of the pedal crank into the
handle.
2 . Choose the fastening site of the handle (see "Pedal
crank adjustment") and fasten it to the footboard with
the adjustment screw.
3 . Repeat instructions 1 and 2 for the left handle and
pedal crank.
4 . Push the console fastening piece at the upper end of
the front frame tube, as shown in the picture. Fasten the
fastening piece with a screw (
5 . Turn the plastic cover of the front frame tube back to
its place and fasten it with a screw.
6 . Unscrew the fastening screws of the handle plastic
covers from above and below. Place the plastic covers
onto the handle fastening sites and fasten them with
screws.
G ) and
•
O W N E R ' S M A N U A L
I ).
G B
C 8 5
5