Main Operating Parts - TECO 100 Variant Manuel D'utilisation

WARNING
Get to know your machine: the best way to prevent accidents and obtain top performance is to get
to know exactly how it works. Learn the function and location of all the controls. Check carefully that
each of the controls operates properly. To avoid any risk of accidents and injuries, the machine must
be installed and operated correctly and serviced regularly.
The machine main operating parts are shown in fig. 9a and 9b:
1 Body with tool-tray
2 Centring handle (device for clamping the wheel to the turntable)
3 Movable lever-less head for tyre mounting/demounting
4 Tilting column
5 Demounting tool control cylinder
6a Cylinder for movable head descent
7 Console
8 Wheel resting and centring unit
9 Clamping control handle
10 Bead breaking unit
11 Bead breaker disc
12 Grease tank
13 Tilting column pedal
14 Inflation pedal
15 Rotation pedal
16 Locking system control valve (only AL version)
17 Pressure gauge for reading inflation pressure
18 Filter Regulator + Lubricator Unit (regulates pressure, filters, removes humidity of and lubricates
the compressed air supplied)
19 Data plate
20 Deflation push-button
21 Control valve for upper bead breaking arm ascent descent
22 Doyfe inflator chuck
23 Control valve for lower bead breaking arm ascent descent
24 Control valve for locking dual-position bead breaker supports
25 Control push-button for upper bead breaker disc penetration
(the bead breaker disc is activated by pressing this push-button; every time the lever 21 is operated
upwards –the bead breaker disc moves away from the rim-, the bead breaker disc is deactivated)
26 Control push-button for lower bead breaker disc penetration
(the bead breaker disc is activated by pressing this push-button; every time the lever 23 is ope-
rated downwards –the bead breaker disc moves away from the rim-, the bead breaker disc is
deactivated)
27 Upper bead breaker arm release hook
28 Head control lever
29 Wheel lifter pedal
30 Vertical arm ascent/descent push-button:
A: ascent B: descent C: locked
31 Lever for the manual movement of the bead breaker arms
33 Adjustable bead breaking support foot
34 IPL-2: Wheel lift
35 IPH: bead pressing device
36 Control valve IPH
37 Handle
38 Lateral bead breaker pedal (only SP version)
38

mAIN OPERATING PARTS

User manual TECO 100 Variant