Main Working Elements Of The Machine; Commands - TECO 36 Special Manuel D'utilisation

8. MAIN WORKING ELEMENTS OF THE
MACHINE
Learn your machine: knowing exactly how the machine works is the best way
to guarantee safety and machine performance.
Learn the function and layout of all controls.
Carefully check that all controls on the machine are working properly.
To avoid accidents and injury, the machine must be installed properly, operated
correctly and serviced regularly.
1 Turntable
2 Clamp
3
Vertical arm
4 Horizontal arm
5
Mounting bare
6 Clamping handle
7 Mounting head
8
Air lubricator
9 Bead breaker arm
10 Bead breaker
11 Wheel support
15 Tyre lever
16 Shoe guard (option)
17 Inflator pedal for t.i. version
18 Air tank

8.1 COMMANDS

8.1.a. PEDAL:
12 Bead breaker control pedal (monostable pedal to operate the bead breaker shoe)
13 Locking wedges opening and closing control pedal (stable three-position pedal
for opening and closing wedges).
14 Turntable rotation control pedal, two-position pedal (three-position only 2V):
• Position 0 (stable) turntable stationary
• Pressed downwards (unstable position), rotate clockwise.
• Lifted (Unstable position) anticlockwise rotation.
19 Movable pole control pedal (3)
(stable two-position pedal for tilting the pole unit).
88
WARNING
User's manual