Table des Matières
Publicité
3
a b
1
2
c
4 - 54
CLUTCH (WR426F)
3. Bend the lock washer 1 tab.
4. Install:
Seat plate 1
G
Clutch damper spring 2
G
NOTE:
Install the seat plate with its chamfered por-
G
tion a facing the clutch boss 3.
Install the seat plate so that it is not caught
G
on the step b.
Install the clutch damper spring with the
G
"OUT SIDE" mark c facing out.
5. Install:
Friction plate 1 [d = ø128 mm (5.04 in)]
G
1
Clutch plate 2
G
Friction plate 2 [d = ø119 mm (4.69 in)]
G
3
NOTE:
Install the clutch plates and friction plates
G
alternately on the clutch boss, starting with a
friction plate and ending with a friction plate.
Use the friction plate 1 for the first while pay-
G
ing attention to the difference in inner diame-
ter.
6. Install:
Bearing 1
G
Plain washer 2
G
Circlip 3
New
G
To push rod 1 4.
NOTE:
Apply the engine oil on the bearing and plain
washer.
ENG
Publicité
Table des Matières
