ST Quadrat LUX-top RVT Manuel D'utilisation page 19

 The lanyard must always be set as short as possible, even when fall arrest systems
are used, in order to reduce any free-fall height in case of a fall to a minimum. It is
essential for safety that the position of the anchor device and the plan of work be
chosen so that the free fall and the fall height are limited to a minimum. Ideally, a
fall over the edge should be completely prevented by appropriate use of the
PPE against falls from a height.
 Position the anchor device on the building so that in case of a fall over the roof edge,
the maximum possible fall factor is 1.
 Please note that failing to follow these user instructions, and if the documentation is
incomplete, all claims for compensation are excluded.
 The manufacturer must be contacted in case of any uncertainty during installation or
use of the system!
 A standard operating procedure with information on the location and use of the anchor
devices should be attached at the access to the safety system (e.g. roof hatch).
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection – www.lux-top-absturzsicherungen.de
page 4 version 04/2018