Checklist - ST Quadrat LUX-top RVT Manuel D'utilisation

This list is available to download from

CHECKLIST

for regular inspection of LUX-top
®
LUX-top RVT anchor point
1 Corrosion
Is there any visible corrosion on one of the components
(bar, footplate, ring bolts, etc.)?
Can a cause for the corrosion (e.g. chimney nearby) be
found?
Is the load-bearing capacity of the anchor device
limited?
Is the fixing accessible for examination?
If yes, has the fixing been carried out completely and
correctly? (if applicable, check tightening torque!)
2 Dirt/soiling
Is one of the components dirty (e.g. soiled by bird
droppings, moss, algae)?
Does the dirt impair its functionality?
Is it possible to prevent the soiling in future?
3 Appearance
Are the anchor points visibly deformed? (E.g. due to fall
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection – www.lux-top-absturzsicherungen.de
www.lux-top-absturzsicherungen.de
®
anchor devices by a competent person
page 11 version 04/2018
yes, on
..................................................................
no
yes,
........................................................................
no
yes
no
yes
no
yes
no
yes,
............................................................
no
yes,
.............................................................
no
yes,
.............................................................
no
yes, ........................................................................