ST Quadrat LUX-top RVT Manuel D'utilisation page 22

Use / system description:
®
The LUX-top RVT
CEN/TS16415:2013, which is used to anchor personal fall protection equipment for
working in areas in which there is a risk of falling.
It can be installed on diverse load-bearing substrates in accordance with the relevant
installation instructions.
®
The LUX-top RVT
If used in accordance with the regulations, the maximum characteristic force input into
the structure by the anchor device in case of a fall is 8 kN, when used as individual anchor
point and 12 kN, when used as start-/endpoint in rope sytems.
®
The LUX-top RVT
body harnesses and energy absorbers (including 1 person for first aid/rescue).
An anchor point already deformed by a fall can still be used for the rescue of a person
who has fallen from a height.
®
LUX-top RVT can be used in the following fall protection systems to EN 363:2008:
 Restraint systems
 Fall arrest systems
 Rescue systems
The respective user instructions of the other PFPE and abseiling (descent) and
rescue equipment used must also be noted and followed!
®
LUX-top RVT is not suitable as an anchor point for load-bearing systems for rope-
assisted access techniques (descent work, etc.)!
®
The LUX-top RVT

®
1 LUX-top RVT

User instructions

Installation Instructions
Anchor point material: Stainless steel W1.4301 / AISI 304
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection – www.lux-top-absturzsicherungen.de
system is an anchor point in accordance with EN 795:2012 Type A +
is intended for loading in all directions crosswise to the rod axis.
anchor device is approved for simultaneous use by 3 people with full
anchor device consists of the following components:
anchor point complete with anchor eye and fixings
page 7 version 04/2018