Installation Process - ST Quadrat LUX-top QUICKFIX II Manuel De Montage Et D'utilisation

Installation process:

1. Fasten girder clamp with eye holder + eye on the threaded rod (M16) according to
Figure 1. Tighten the nuts on both sides with a torque of 105 Nm.
Torque
105 Nm
2. Attach second girder clamp together with the nuts and washers on the threaded rod
according to Figure 2. (Do not tighten lock nut yet.)
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection – www.lux-top-absturzsicherungen.de
Figure 1
Figure 2
page 9 version 07/2019