Cleaning The Equipment - ST Quadrat LUX-top QUICKFIX II Manuel De Montage Et D'utilisation

Maintenance, care and inspection:
®
The LUX-top QUICKFIX II anchor device needs to be checked by a competent person
as required, but at least every 12 months, taking exact note of the manufacturer's
instructions.
This inspection is essential, as the safety of the user depends on the effectiveness and
durability of the anchor device.
The check is to be arranged by the operator.
An inspection log card is included in the appendix to these user instructions, on
which the inspection by the competent person must be documented.
The date of the next scheduled inspection must always be entered on the inspection log
card.
Contact between the anchor device and chemicals as well as other aggressive substances
must be prevented!

Cleaning the equipment

®
The LUX-top QUICKFIX II anchor device is weather resistant.
Depending on the conditions of use, the anchor device must be cleaned occasionally with
a brush and warm water.
Contact with acids, bitumen, cement, chloride, paint or aggressive cleaning liquids must
be avoided.
Under no circumstances use aggressive cleaning agents or chemicals!
Miscellaneous:
Changes or additions may not be made without the prior written consent of the
manufacturer. Equally, all repairs may only be carried out in agreement with the
manufacturer. If sold on to another country, the reseller must make the instructions for
use, maintenance, regular checks and repairs available in the language of the other
country to ensure the safety of the user.
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection – www.lux-top-absturzsicherungen.de
page 11 version 07/2019