Plumbing - BWT Soliflow Notice D'installation Et Conseils D'utilisation

6.

PLUMBING

Connect the return fittings to the
outlets on Soliflow.
CAUTION !
If the overflow is installed incorrectly (or not at all) the water level can rise too high, even to the point
of flooding the motor and other electrical components. This type of incident is not covered by any
guarantee.
28/40
2021/01 - Indice de révision : I - Code : 26901
In the case of a single return
fitting configuration, blank the
outlet that is not in use.
Insert the splash lip.
Using Ø 50 mm pipes and
fittings, connect up the overflow,
a slope of at least 1 % is
mandatory.
BWT myPOOL
FILTRATION