Installation Of The Clogging Indicator; Wiring - BWT Soliflow Notice D'installation Et Conseils D'utilisation

7.

INSTALLATION OF THE CLOGGING INDICATOR

Remove the protective cap
from the accessories opening.
8.

WIRING

Connect the motor cable coming from the
control panel to the pump motor cable.
BWT myPOOL
FILTRATION
Check that the seal is in place and in good condition.
Put the lid on the connection box and fix it in position using
4 thermoplastic screws Ø7x50 + washer.
Insert the clogging indicator
into the accessories opening.
Place the motor capacitor in the connection box.
2021/01 - Indice de révision : I - Code : 26901
29/40