Underwater Light - BWT Soliflow Notice D'installation Et Conseils D'utilisation

18.4

Underwater light

PROBLEM: The underwater light does not turn on Careful! These interventions must be carried out
by a qualified electrician
The transformer is not supplied with 230 V
The transformer is faulty
The 12 V current does not arrive at the bulb
The 12 V current arrives at the bulb but the bulb does
not light up
38/40
2021/01 - Indice de révision : I - Code : 26901
CAUSE
Check the voltage at the transformer input terminals
Check the condition of the fuse in the electrical panel
Reconnect the power supply
Replace it with a transformer that has the same rating
Check the electrical line between the transformer and
the underwater light
Replace the faulty bulb
SOLUTION
BWT myPOOL
FILTRATION