Safety Instructions - SOMFY IXENGO L 230V RTS Manuel D'installation

Ixengo L 230V RTS
Translated version of the manual
CONTENTS
1 - Safety instructions _______________________ 1
1.1 Caution - Important safety instructions
1.2 Introduction
1.3 Preliminary checks
1.4 electrical installation
1.5 Safety instructions relating to installation
1.6 Regulations
1.7 Assistance
1.8 Risk prevention
2 - Product description ______________________ 4
2.1 Composition of the standard kit * - Fig. 1
2.2 Dimensions - Fig. 2
2.3 Field of application - Fig. 3
3 - Installation _____________________________ 4
3.1 Dimensions to be defined (opening inwards) - Fig. 4
3.2 Dimensions to be defined (opening outwards) - Fig. 5
3.3 Installing the pillar mounting bracket
3.4 Installing the gate leaf mounting bracket - Fig. 7
3.5 Installing the stop blocks on the ground - Fig.8
4 - Motor electrical connection - Fig. 9 __________ 4
5 - Locking/unlocking the motors ______________ 4
6 - Technical data___________________________ 4
Copyright © 2015 - 2016 Somfy SAS. All rights reserved.

1 SAFETY INSTRUCTIONS

This symbol indicates a danger, the different
degrees of which are described below.
1
Indicates a danger which may result in immediate death or
1
serious injury
2
2
2
3
Indicates a danger which may result in death or serious
3
injury
3
4
Indicates a danger which may result in minor or moderate
4
4
injury
4
Indicates a danger which may result in damage to or
4
4
destruction of the product
4
4
The drive must be installed and adjusted by a professional
motorisation and home automation installer, in compliance
with the regulations of the country in which it is to be used.
To meet the requirements of standards EN 13241-1,
EN 12445 and EN 12453, the installer must follow the
instructions in this manual throughout the installation
procedure.
Failure to follow these instructions could result in serious
injury, e.g. crushing by the gate.
1.1 Caution - Important safety instructions
For reasons of personal safety, it is important to follow all
the instructions, as incorrect installation can lead to serious
injury. Retain these instructions.
The installer must train all users to ensure the drive is used
in complete safety, in accordance with the user manual.
The user manual and installation manual must be given to
the end user. The installer must explain clearly to the end
user that installation, adjustment and maintenance of the
drive must be performed by a professional drive and home
automation installer.
1.2 Introduction
> Important information
This product is a motor for hinged gates, for residential use.
To ensure compliance with the standard EN 60335-2-103,
this product must be installed with a Somfy control box.
The assembly is together designated as a "drive". The main
purpose of these instructions is to satisfy the requirements
of the aforementioned standard and to ensure the safety of
equipment and persons.
DANGER
WARNING
PRECAUTION
ATTENTION
DANGER
WARNING
1