GB
3. Tilt the cylinder upwards and
pull the shaft (24) out of its seat.
4. Insert the new cylinder by rever-
sing the sequence.
Cleaning, maintenance,
storage
Work that has not been descri-
bed in these Instructions must
be carried out by a servicing
agency authorised by us. Only
use original parts.
Wear gloves when handling the
cylinder.
Before any maintenance or
cleaning work, turn the device off,
pull the safety key (
for the drum to stop.
General cleaning and mainte-
nance work
Do not jet water onto the imple-
ment and do not clean it under
flowing water. This would result
in the danger of an electric
shock and the implement could
be damaged.
•
When work has finished remove plant
residues adhering to the wheels, in-
side the ventilation opening, the grass
ejector opening and the cylinder. Doe
not use hard or pointed objects for this
purpose as they could damage the
implement.
•
To ensure that the collision guard flap
closes properly, remove any earth that
may have collected on the collision
guard springs and/or the housing.
•
Completely empty the collection bag.
32
E
13) and wait
•
Always keep the implement clean. Do
not use cleaning agents or solvents.
We cannot be held liable for damage
caused by our implements if they were
improperly repaired, if non-original parts
have been used or if they were used not
in keeping with their intended purpose.
Storage
•
Remove the rechargeable battery from
the device before storing the device
(winter storage).
•
Only store the batteries in the partially-
charged state. The charge state
should be 40-60% during a longer
storage period (one of the two middle
LED lights of the charge state indicator
(
11a, or.
A
A
•
Check the battery charge level ap-
proximately every 3 months during a
lengthy storage period and recharge if
necessary.
•
Store the batteries between 10° C
and 25° C. Avoid extreme cold or heat
during storage, so that the batteries do
not lose power.
To save space the top grip handle
C
can be folded down after releasing
all tightening levers (3).
Disposal and protection
of the environment
Dispose of the implement, accessories
and packaging in an environment-friendly
manner.
Electrically-powered appliances
must not be disposed of with the do-
mestic waste.
12) illuminates).