Grizzly ARV 4038 Lion-Set Mode D'emploi page 25

lifted or tilted and when traver-
sing other surfaces than grass.
• Never leave the implement
unattended at the place of work.
• Always switch off the implement
and disconnect the power plug:
- Whenever you leave the imple-
ment
- Before you clean the ejector
opening or unblock or unclog
the implement
- When the implement is not
being used
- During all maintenance and
cleaning work
- When the power cable is da-
maged or has become tangled
- When the implement hits an
obstruction during work or
when unusual vibrations arise.
Establish the cause and see if
the implement has been dama-
ged. Do not repair it yourself!
Have the implement repaired
by an authorised workshop!
• Store the implement in a dry
place well out of reach of
children.
CAUTION! The following
states how to avoid damage
to the implement and any
resulting harm to people:
Take care of your implement
• Switch off the power when
the implement is to be carried
across steps.
• Inspect the implement each
time before it is to be used.
Never operate the implement
if safety devices (e.g. impact
protector, parts of the cutting
facility or bolts are missing,
worn out or damaged. Check
especially the power cable and
starting lever for damage. To
avoid imbalance, all tools and
bolts must be exchanged as
complete sets.
• Only use spare parts and ac-
cessories that have been sup-
plied or recommended by the
manufacturer. The use of alien
parts results in the immediate
loss of all guarantee claims.
• Ensure that all nuts, bolts and
screws are firmly tightened and
that the implement is in a safe
working state.
• Never try to repair the imple-
ment yourself, other than you
have been trained accordingly.
All work that has not been li-
sted in these Instructions must
only be carried out by authori-
sed servicing agencies.
• Treat the implement with the
greatest care. Always keep the
tool clean for better and safer
work. Follow the maintenance
instructions.
• Never overload the implement.
Always work within the speci-
fied capacity range. Do not use
low-power machines for heavy-
duty work. Do not operate the
implement for purposes for
which it is not intended.
Careful handling and use of bat-
tery devices
• Charge the batteries only in
chargers that are recommen-
ded by the manufacturer. Risk
of fire if a charger that is suita-
ble for a specific type of battery
is used with other batteries.
GB
25