Trouble Shooting - Grizzly ARV 4038 Lion-Set Mode D'emploi

Trouble Shooting

Problem
Strange noises,
rattling or vibra-
tions
Equipment does
not start
Motor stops
Result unsatis-
factory or motor
labours
Possible Cause
Foreign bodies on the drum Remove foreign bodies
Spring tines or drum blades
are damaged
Drum not correctly installed
Slipping toothed belt
Battery is empty
Battery is not inserted
Defective start lever
Defective motor
Blockage by foreign object
Cut height too low
Blade area blocked
Overload protection triggers Allow the device to cool for about 1 min
Internal loose contact
Spring times of the aerator
drum is worn
Blade of the scarifying drum
blunt or damaged
Toothed belt defective
Incorrect transport position
of working position selected
Lawn too high
Fault Fixing
Change the drum
Install the drum correctly (see Chapter
"Replacing the spindle")
Repair by customer services
Check charge level,have repairs car-
ried out by a qualified electrician, if
necessary
Insert battery
Repair by customer services
Remove the foreign object
Set a higher cut height
Clean the equipment
Repair by customer services
Change the drum
Change the drum
Repair by customer services
Select the working position or the
adjustment position (see chapter
„Setting working positions")
Pre-mowing, see Chapter „Operation"
GB
35