Cleaning, Maintenance And Storage; General Cleaning And Maintenance Work; Changing The Blade - Grizzly ERM 1500-33 LF Traduction De La Notice D'utilisation Originale

GB
Switch off the equipment after
work and in order to transport
it, disconnect the plug and wait
until the blade stops. There is a
risk of injury.
Cleaning, Maintenance
and Storage
Have work that is not described in
these instructions carried out by
a customer service centre that we
have authorised. Use only original
parts.
Wear gloves when handling the
blade.
Switch off the equipment before all
maintenance and cleaning work,
disconnect the plug and wait until
the blade stops.
General Cleaning and Mainte-
nance Work
Do not hose down the lawnmower
with water. This would result in the
danger of an electric shock.
• Always keep the equipment
clean. To clean, use a brush or
cloth but no detergent or solvent.
• After mowing, use a piece of
wood or plastic to remove ad-
herent plant remains from the
wheels, ventilation holes, ejec-
tion hole and blade area. Do not
use hard or pointed objects, as
these may damage the blade.
• oil the rollers from time to time
• Before each use, check the lawnmower
for obvious defects such as loose, worn
or damaged parts. check that all nuts,
66
All manuals and user guides at all-guides.com
bolts and screws are sitting firmly.
• check the covers and protective de-
vices for damage and check that they
are sitting correctly. Replace them if
necessary.

Changing the Blade

If the blade is blunt, it can be sharpened
by a specialist workshop. If the blade
is damaged or showing signs of imbal-
ance, it must be replaced (see chapter on
"Spare Parts").
1. Turn the equipment over.
2. Use sturdy gloves and hold the
blade (19) firmly. Loosen the
blade bolt (17) with the supplied
spanner (4).
3. Install the new blade (19) in the
reverse order. Ensure that the
blade is positioned correctly and
the screw (20) tightened firmly.
Storage
clean the equipment before putting it
away (see "General cleaning and Mainte-
nance Work").
In order to ensure that the device
takes up less space, unlock the
clamping lever (2) and fold down
the bow-type handle (1). Make
sure that the cable of the device
(11) is not pinched.
• Keep the equipment dry and out of
reach of children.
• Allow the motor to cool before storing
the equipment in a confined space.
• Do not cover the equipment with nylon
bags as moisture could build up.