Setting The Cutting Height; Manually Interrupting/Starting The Operating Cycle; Cleaning/Maintenance/Storage; General Cleaning And Maintenance Work - Grizzly MR 1000 Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
The first cut takes place roughly in April
when the grass is about 7 - 8 cm high.
During the main growing season, the lawn
is mowed at least once a week.

Setting the cutting height

Switch off the device and wait for
the blade to come to a stop. There
is a risk of personal injury.
1. Open the cover on the cutting height
adjustment (3)
2. Set the cutting height adjustment
wheel (14) to the desired cutting
height.
3. Close the cover on the cutting height
adjustment (3).
The device can be infinitely adjusted to a
cutting height between 20 and 60 mm.
The correct cutting height is between 30
and 45 mm for an ornamental lawn and
about 30 to 65 mm for a utility lawn.
A high cutting height should be
selected for the first cuts in the
season.
Manually interrupting/
starting the operating
cycle
Interrupting the operation
Press the stop button (1) to stop the mow-
er during operation.
Starting/resuming operation
1. Open the cover on the LCD display
(2).
2. Press the start key (18).
3. Close the cover on the LCD display
(2).
The automatic lawn mower starts the
set operating cycle or resumes its pre-
vious activity without interruption.
Cleaning/maintenance/
storage
Have any work that is not de-
scribed in these instructions
performed by an authorised cus-
tomer service centre. Only use
original parts.
Before any maintenance or clean-
ing work, switch off the device and
wait for the blade to come to a
standstill.
Wear gloves when handling the
blades.
General cleaning and mainte-
nance work
Never spray down the lawn
mower with water. There is a
risk of electric shock.
Keep the device clean. Use a brush
or cloth for cleaning, but do not use
any aggressive cleaning agents or
solvents.
Grease the wheels from time to time.
Check the covers and protective de-
vices for damage and correct fit. Re-
place these if necessary.
Replacing the
rechargeable battery
Switch off the device and wait
for the blades to come to a stop.
There is a risk of personal injury.
GB
95

Publicité

Table des Matières
loading

Table des Matières