Silk-n Lipo H5001 Mode D'emploi page 85

Control
Operating light
(middle)
Indicator light
(right)
4.3 Energy levels
Silk'n Model H5003 has 15 levels of Electrical Muscle Stimulation (EMS).
This gives you excellent control of the intensity of muscle stimulation you
wish to use for each part of the body you treat. What's more, you can
change levels as often as you like during a treatment.
U
U
U
a
Model H5003 UM 3627A no laser electrode pads combined ED199-12 clean.indd 13
Action
Green light blinks
continuously
Constant green
---
To increase the EMS level: Short press the + button as many times
as you need to set to the EMS level that is comfortable for you. You
will see that operating light blinks more quickly as you increase the
EMS level.
To reduce the EMS level: Short press the - button as many times as
you need (refer to section "4.2 Controls and settings").
To go back to the lowest EMS level: Long press the - button.
You can only change EMS levels when the treatment unit/s are in
good contact with your skin. When there is no contact with the skin,
the EMS drops to zero.
Function
y
The device is on, and has good
contact with the skin.
y
Blinks faster as the EMS level
increases.
y
There is no contact with the skin.
y
The device will then shut down
automatically after a minute or so.
y
Not in use.
13
EN
27/11/2017 13:35:23