Silk-n Lipo H5001 Mode D'emploi page 102

Table 6: Recommended Separation Distances between Portable and Mobile RF
EN Communications Equipment and the device
The device is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user
electromagnetic interference by maintaining a minimum distance between portable and
mobile RF communications equipment (transmitters) and the device as recommended
below, according to the maximum output power of the communica
Rated maximum
output power of
transmitter W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the
in watts (W) according to the transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range
applies.
Note 2: These guidelines may not apply in all
affected by absorption and reflection from structures, objects and people
Model H5003 UM 3627A no laser electrode pads combined ED199-12 clean.indd 30
of the device can help prevent
Separation distance according to frequency of
transmitter
m
150 kHz to 80
80 MHz to 800
MHz
MHz
0.12
0.37
1.17
3.7
11.7
maximum output power rating of the transmitter
situations. Electromagnetic propagation is
30
tions equipment.
800 MHz to 2,5
GHz
0.12 0.23
0.37 0.74
1.17 2.33
3.7 7.38
11.7 23.33
.
27/11/2017 13:35:24