Silk-n Lipo H5001 Mode D'emploi page 6

Battery Removal
To remove the battery, the device must
be broken apart. The device will no longer
EN
function after this procedure, nor can it be
repaired. Any warranty will be void when the
device housing is broken and the battery is
removed. We recommend you wear safety
protective goggles and gloves.
Silk'n is not liable for any physical or material
damages as a result of performing this
procedure.
To remove the battery place the hand unit
on a hard, strong surface. Use a hammer to
hit the device on the seam and continue to
do so along the whole seam on both sides
of the device.
Once the seam is sufficiently broken, use
pliers or a screwdriver to take the housing
apart. Unscrew the PCB (printed circuit board)
and remove the battery by disconnecting
the plug from the PCB.
4
Lipo UM 3385A FDA Canada ED228-05.indd 4 27/11/2017 13:36:13