Silk-n Lipo H5001 Mode D'emploi page 83

5.
6.
7.
a
Model H5003 UM 3627A no laser electrode pads combined ED199-12 clean.indd 11
Next, fold each side of the belt inwards so that you see the black
Velcro pads.
Velcro
pad
Slide each end of the belt into the connectors and then fold
backwards, so that the Velcro pad sticks to the belt. Your belt will
now look like this.
Of course, to use Silk'n Model H5003, you will need to disconnect
one side, place the belt on your body and then re-connect the side
you disconnected!
Note that you can only use the device when:
the treatment unit/s are charged.
y
you have placed a wet electrode pad on each treatment unit
y
(see section "4.4 Wetting the electrode pads").
you have read this manual, and understand how to use the
y
device.
11
EN
Velcro
pad
27/11/2017 13:35:23