Control Station Devices (Csds) Mounting Wallboxes - Lutron GRAFIK 7000 Guide D'installation Et De Maintenance

Control Station Devices (CSDs):
Mounting Wallboxes
• Use wallboxes with a minimum depth of
2-3/4 in. (70 mm) for control station devices
(CSDs); wallboxes are required only for CSDs
• Multigang installations may require spacers
between wallboxes
• Mount wallboxes between flush and 1/8 in.
(3 mm) below finished wall surface
• Finished wall should not have gaps around the
wallbox of greater than 1/8 in. (3 mm)
• Ground metal wallboxes whenever possible
• See the instructions sent with each individual
CSD for device-specific mounting requirements
and instructions.
1/8 in.
(3 mm)
max.
Wallbox
Drywall
Mounting of a single-gang US wallbox shown.
Wall
Mounting
frame
Wallbox
Mounting frame orientation of a single-gang
EOMX product shown.
NOTE: European backbox required.
16 Installation of GRAFIK 5000/6000/7000 System
2-3/4 in.
(70 mm)
min.
R