Lutron GRAFIK 7000 Guide D'installation Et De Maintenance page 7

Processor Panels:
Mounting (continued)
Recess Mounting
Wall shown cut away
Dedicated
feed
PELV
(Class 2:
USA)
wiring
16 in.
(410 mm)
Front View
Caution! Water damages processors.
Install this processor in a location where
it will not get wet.
Install Subplate
Reinstall the subplate in the processor panel
enclosure using the four (4) screws that were
loosened or removed with the subplate.
R
Surface Mounting
Ceiling
PELV
(Class 2:
USA) wiring
Side View
Surface mounting notes
• Use spacers to ensure that back surface is
1/8 in. (3.2 mm) away from the wall;
subplate mounting screws will protrude 1/8
in. (3.2 mm) behind the panel
• Use only the four holes indicated when
surface mounting - other holes are for
mounting the subplate
Installation of GRAFIK 5000/6000/7000 System
Dedicated feed
Front View
Ceiling
Space off
of the wall
as noted
Side View
7