General Safety Notes - Grizzly EGT 1345 Traduction De La Notice D'utilisation Originale

UK
Wear cut-protection safety boots
with anti-slip soles.
Working width
L
WA
Sound power level L
dB
Safety class II
Do not dispose of electrical equip-
ment in household waste.
Symbols in the manual
Warning symbols with informa-
tion on damage and injury pre-
vention.
Instruction symbols (the instruction
is explained at the place of the ex-
clamation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling

General safety notes

Warning! Improper use of this tool
may lead to serious injury. Read
this instruction manual carefully
before you start working with the
tool, and familiarise yourself with
its controls.
Keep the manual in a safe place and pass
it on to any subsequent owner to ensure
that the information it contains is always
available.
Please read the following safety
guidelines in order to avoid risk of
fire, electric shock, personal injury
and damage to objects
84
in dB.
WA
Preparation:
• Never allow children or other persons
unfamiliar with the user manual to use
the shredder. Local regulations or by-
laws may determine the minimum age
for using the device.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
• Children must be supervised in order
to ensure that they do not play with
the equipment.
• Never use the tool while others, espe-
cially children or pets, are close by.
• Familiarise yourself with handling the
tool and pay attention to all possible
dangers that may be overheard while
working with the tool.
• Check the terrain on which you will
be using the tool, and remove stones,
sticks, wires or other foreign objects
that may be caught up and spun off.
• Wear proper working clothes, such as
firm footwear with non-slip soles and
strong long trousers. Do not use the
tool barefoot or wearing open-toed
sandals.
• To prevent injury from the tines, only
switch the tool on in its working position.
• Examine the tool beforehand every time
you use it. Do not use the tool when the
safety components (such as the power
safety catch or guard), cutting parts or
bolts are missing, worn or damaged. In
particular, check the mains cable and
dead-man lever for damage.
• Only replace damaged bolts or tines in
complete sets to prevent imbalance.
• Only use replacement and accessory