P2 - Serial - Agilent Technologies Turbo-V 903 Notice De Mode D'emploi

18 Technical Information
How to Connect the Outputs of the Controller
Figure 17
P2 – Serial
Figure 18
This is a 9 pin D-type serial input/output connector to control via an RS 232 or
RS 485 connection the TV 903 Pumping System.
Table 3
280/306
Output to a relay coil
9 pin connector
Signal characteristics and use
Turbo-V 903 Pumping System User Manual / 87-901-016-01 (A)