Factory Service Options; Accessories; Serial Numbers Notes; Contacting Varian - Agilent Technologies TriScroll 300 Série Manuel D'installation Et D'opération

Factory Service Options

Table 23 lists the factory-rebuild service and advance exchange of complete TriScroll Pumps, as well as factory service
options that Varian offers.
Advance Exchange TriScroll 300 Single Phase
Advance Exchange TriScroll 300 Three Phase
Advance Exchange TriScroll 310 Single Phase
Advance Exchange TriScroll 300 Pump Module Only
Advance Exchange TriScroll 310 Pump Module Only

Accessories

The accessories listed in Table 24 are available for use with the TriScroll 300 series pump. Contact your local Varian office
to place an order. A list of offices is included on the rear cover of this manual.
Purge Kit
Three Phase Cable Kit
Exhaust Extension
Exhaust Filter Kit

Serial Numbers Notes

This manual applies to TriScroll 300 pumps with serial numbers beginning with LP, and ascending from LPB80124. For
service on TriScroll pumps with serial numbers J7000001 to A8000108 contact your nearest Varian office.
TriScroll 300 series pumps with serial number above LPC80250 have 1/4-18 National Pipe Threads in the bearing purge,
gas ballast, and exhaust ports.
Pumps with serial numbers below LPC80250 were manufactured with 1/4-19 British Standard Pipe Threads. Contact your
local Varian office if mating hardware is required.

Contacting Varian

In the United States, you can contact Varian Customer Service at 1-800-8VARIAN. See the back cover of this manual for a
listing of our sales and service offices.
Internet users:
❑
Send email to Customer Service & Technical Support at vpl.customer.support@varianinc.com
❑
Visit our web site at www.varianinc.com/vacuum
❑
Order on line at www.evarian.com
42
TriScroll 300 Series Vacuum Pump
Table 23

Factory Service Options

Factory Service Options
Table 24

Accessories

Part Number
EXPPTS03001
EXPPTS03003
EXPPTS03101
EXPTS0300SC
EXPTS0310SC
PTSPURGEKIT
S4789001
S4707002
PTS300EXFIL