Important To Know Before Breast Pumping - Ameda Finesse Mode D'emploi

TIP - USE
new premium batteries (such as Energizer, Duracell), insert correctly
as shown.
BATTERIES
WARNING: DO NOT
!
install backwards,
charge, put in fire, or mix
with other battery types. May
explode or leak causing injury.
Replace all batteries at the
same time.
1. OPEN
battery compartment on the bottom of the pump base.
2. INSERT
six new AA batteries as shown.
3. CLOSE
the battery compartment.
Low Batteries
When batteries are low, the Pump Light will blink slowly and the
pump will stop working. Turn the Suction dial to the off position.
You may then replace all batteries or remove batteries and use
the AC Power Adapter. Make sure batteries are not installed in
pump while the AC Power Adapter is plugged into the side of
the pump or while the Suction dial is in the on position.

7.2 Important to Know Before Breast Pumping

Learn how your breasts release milk and why Ameda's Custom
™
Control mimics the way your baby breastfeeds.
Let-down & Milk Flow
When babies breastfeed, they latch on and start sucking quickly to help your body
release hormones that signal your breasts to release your milk. This is called let-
down. Once let-down occurs, your baby sucks longer and slower to help manage
the milk flow that is spraying into your baby's mouth. With the Finesse™ breast
pump, the separate dials allow you to mimic your baby's comfortable sucking
pattern.
15