Maintenance - Ameda Finesse Mode D'emploi

! IMPORTANT: the flanges and milk storage containers
can also be washed on upper rack of a standard,
household dishwasher. DO NOT use solvents or abrasives.
Allow to air dry on a clean surface. DO NOT put parts in Steam
Bottle Sterilizers or Microwave Sterilizer Bags.
Cleaning Finesse Pump: Make sure it is unplugged prior to
wiping the Finesse Breast Pump and power adapter with clean,
damp cloth.

9. MAINTENANCE

The breast pump base does not require service or maintenance
except for changing batteries, if applies.
9.1 Breast Pump Valve Check
Inspect the valves for tears or holes. Replace any damaged
valves prior to pumping. Wash valves per cleaning section. Do
not insert bottle brush or something similar into valves.
We recommend replacing valves approximately every
8-12 weeks but this can vary depending on cleaning
and use.
9.2 Storing and Transporting Finesse/HygieniKit
Disconnect HygieniKit and power adapter from pump before
transporting or storing the product. When storing product, store
in conditions as described in these instructions (see Section
13). Remove batteries before storing product for long periods of
time. Handle with care when transporting product.
19