Assembly; Converting From Electric Pumping To Manual Pumping - Ameda Ultra Mode D'emploi

Assembly

Converting from Electric Pumping to Manual Pumping

1. Unsnap and
remove adapter
cap.
2. Remove diaphragm
from upper
chamber of
breast flange.
6. Pull handle down
and snap handle
collar around
groove of
breast flange.
(See shaded area
in diagram above.)
3. Fit piston seal onto
base of piston.
7. Gently push white
valve firmly onto
ring on underside
of breast flange.
4. Push center of
handle down and
snap top of piston
into groove on
handle.
8. Screw breast
flange onto bottle.
Handle is on
correctly if top
of handle is a
straight line.
5. Push piston into
upper chamber
of breast flange.
E N G L I S H
11